50950260/AP1216 101
CHAPTER 8
SPECIFICATIONS
Loader Specifications
Specification R105
Operating Weight 4000 lbs. (1814 kg)
Shipping Weight
2
3515 lbs. (1594 kg)
Rated Operating Load
1
(capacity)
1. Operating load (capacity) rated for R105: 55 in. (1397 mm) 10.5 ft
3
, (0.3 m
3
);
dirt/construction bucket, in accordance with SAE J818.
2. R105 shipped with 27.0 x 8.50 - 15 tires.
1050 lbs. (476 kg)
Engine
Make Yanmar
Model (DPF Models) 3TNV88C-KMS
Model (Non-DPF Models) 3TNV88-BKMS
Displacement
100 in
3
(1,64 L)
Power (net) (DPF Models) 35 hp (26 kW)
@ 2800 rpm
Power (net) (Non-DPF Models) 35 hp (26 kW)
@ 2600 rpm
Peak Torque (DPF Models) 80 ft.-lbs. (109 N·m)
@ 1820 rpm
Peak Torque (Non-DPF Models) 80 ft.-lbs. (109 N·m)
@ 1200 rpm
Hydraulic System (theoretical)
Main Hydraulic System Pressure 2750 psi (190 bar)
Standard-Flow Rating 14.5 gpm (55 L/min)
Electrical
Battery 12-Volt DC, 800 CCA
Starter 12-Volt DC (2.3 Kw)
Alternator (DPF Models) 55 amperes
Alternator (Non-DPF Models) 40 amperes
Capacities
Chaincase (each) 8 U.S. qts. (7,6 L)
Crankcase 7.6 U.S. qts. (7,2 L)
Fuel Tank (DPF Models) 9.5 U.S. gal. (36 L)
Fuel Tank (Non-DPF Models) 10.3 U.S. gal. (39 L)
Hydraulic Reservoir 8.0 U.S. gal. (30 L)
Sound
Pressure Level (Operator Ear) 85 dB(A)
Power Level (Environmental) 101 dB(A)
To Next Page
Loading...