24 50950260/AP1216
Engine Speed Control
On DPF Models, an engine speed control
(Figure 6) is provided for setting the
engine speed. Move the control clockwise
to increase the engine speed, and counter-
clockwise to decrease the engine speed.
Engine speed may be limited while diag-
nostic trouble codes (DTC’s) are active or
during a cold start. See the engine diag-
nostic chart for the DTC’s on page 73 or
the cold starting procedure on page 42.
On Non-DPF Models, a right-hand con-
trolled throttle lever is provided on all
models for adjusting the engine speed.
Move the control forward to increase the
engine speed and rearward to decrease the
engine speed.
With T-bar controls, a foot pedal
(Figure 7) is provided as a secondary
throttle, which can be used to override the
engine speed control. If the foot throttle is
released, the engine will return to the
speed set by the engine speed control.
Figure 6 Engine Speed Control -
DPF Models above, Non-DPF
Models below
Figure 7 Foot Throttle - DPF
Models above, Non-DPF Models
below
To Next Page
Loading...