50950260/AP1216 27
8. Engine Malfunction Lamp – Indicates the engine ECU has detected a mal-
function of the engine.
9. Engine Coolant Temperature – Lights if the engine coolant becomes too
hot, warning the operator to stop the engine. Allow the engine to cool, deter-
mine the cause for the high temperature and correct the problem before
restarting the engine. During normal operation, this indicator should be OFF.
10. Hydraulic Oil Temperature – Lights if the hydraulic oil becomes too hot,
warning the operator to stop engine. Allow the hydraulic system to cool and
determine the cause of the high temperature. During normal operation, this
indicator should be OFF.
11. Parking Brake Switch – Used to manually apply the parking brake. Lights
when the parking brake is applied.
12. Engine Speed Control – Controls the engine speed. Move the control clock-
wise to increase and counter-clockwise to decrease the engine speed.
13. Light Switch – Controls all the lights on the loader. Symbols denote the four
positions of the light switch. In a clockwise direction these are:
•OFF
• Tail Lights ON
• Front Work Lights with Tail Lights ON
• both Front and Rear Work Lights
For the lights to function, the keyswitch must be in the RUN position.
14. Accessory Outlet – 12-volt DC power outlet.
To Next Page
Loading...