DF 7500
TL099-01-00-15
26-03-2015
position souhaitée, abaisser la goupille de
blocage (Fig. 41) de façon à ce qu'elle touche le
plateau et en appuyant sur le bouton du
pivotement faire tourner la structure et faire en
sorte que la goupille s'introduise dans l'oeillet
choisi.
position, push down the block pin (Fig. 41)
touching underneath plate, push automatic
oscillation button to make frame turning so
that the pin snaps in the next slot.
(Fig. 41)
Placer l'interrupteur en position OFF (Fig. 42).
Turn the switch to OFF position (Fig. 42).
(Fig. 42)