125
Don’t rotate the steering bar when the steering bar is not
completely mounted ( to avoid falling of steel balls).
Support the steering bar well, lubricate the upside axle steel
bowl with grease and confirm the amounts of steel balls.
（21pcs）
Lubricate the seat ring of top seat with grease.
Rotate the steering bar left and right to make steel balls
contacted closely.
Tools:
Wrench for screw bolts.
Confirm smoothly sliding of front fork without any loose.
Mounting procedure：
Mount components of front shock absorber.
Mount steering bar.
Mount the shielding plate of vehicle body.
Mount front wheel.
Note：see P89 for figure for dismantling and mounting front fork.
To Next Page
Loading...
