75
Use a multimeter to measure the impedance value between green/red wire on magneto and body ground.
Standard value ：2.0-2.5Ω（20℃）
When the measured value exceeds the standard value, replace the magneto coil.
1.7.2 Disassembly
Disassemble the body guard.
Remove right body fender.
Remove fixing bolts and screws and take off fan cover.
Remove 4 fixing bolts of cooling fan to take the latter off.
Fix the flywheel with a multiple use fixing spanner.
Disassemble the flywheel fixing bolt.
Remove the flywheel with a flywheel puller.
Disassemble the retaining key.
Disassemble the lead connector of the alternator.
Disassemble the alternator stator.
To Next Page
Loading...
