18
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
AM
AM
Time displays are shown in hour:minute format (i.e., 1:09 represents one hour and nine minutes,
not 109 minutes!). The colon that separates hours and minutes blinks once per second when the
display is indicating real time such as Surface Time, Bottom Time, and Time of Day. NDL,
TAT, Deco Stop Time, Time to Fly, and Time to Desaturate are calculated projections of time
and use a solid (non-blinking) colon to indicate that they are counting down.
TEMPERATURE DISPLAY
While on the Surface, Ambient Temperature is displayed on the Surface Mode screen (Fig. 7a).
During a dive, Water Temperature is displayed when the button is pressed 2 times to view the
Second Alternate display (Fig. 8a).
If the Temperature exceeds a value of '99', two dashes ( - - ) will be displayed on the screen until
the unit's temperature decreases to '99'.
BACKLIGHT FEATURE
During a dive, the Resource Pro's Hydroglow Backlight will illuminate the display when the but-
ton is pressed for 2 seconds and released. The display will remain illuminated for 10 seconds.
OPERATING TEMPERATURE
The Resource Pro will operate in water temperatures from 28° to 95° F (-2 to 35 °C) and in air
from 20° to 140°F (-6 to 60 °C). At extremely low temperatures, the LCD may become sluggish,
but this will not affect it's accuracy. If stored or transported in extremely low temperature areas
(below freezing), warm the module and battery with body heat before diving.
Fig. 8 - Temperature (Dive)
Fig. 7 - Temperature (Surface)
a
a
To Next Page
Loading...
Need help?
General
