30
POST DIVE SURFACE MODE
When you ascend to 3 feet (1 meter) or shallower, the Resource Pro will enter Surface Mode and
begin counting your Surface Interval.
TRANSITION PERIOD
The first 10 minutes is, in affect, a Transition Period during which time the following informa-
tion is displayed top to bottom (Fig. 21):
Surface Interval time (6 minutes) with colon flashing.
Wave symbol flashing to indicate Surface Mode (the Dive Profile symbol disappears).
Dive number (2).
Temperature (76) and graphic F (or C)
Time of Day (11:45 AM)
Nitrogen Bar Graph indicating current nitrogen loading.
If you descend during the 10 minute Transition Period, time underwater will be considered a con-
tinuation of that dive. The time at the surface (if less than 10 minutes) will not be added to
Elapsed Dive Time.
To view that dive's Log (Fig. 22), press the button 1 time. Log Mode is described on page 32.
press the button again to view the second screen.
The unit will revert to Surface Mode after 2 minutes.
NOTE: Data will not be stored in the unit's Log until the 10 minute
Transition Period is completed. Also, no other modes are accessible.
Fig. 21 - Transition Period
Fig. 22 - Log Mode
N
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
AM
LOG
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
AM
To Next Page
Loading...
Need help?
General
