27
Resource Pro
NDL
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
FT
WARNING: If the Wet Activation feature is Set OFF, the unit must be
manually activated prior to start of a dive. It will not activate automatically
by immersion in water unless the Wet Activation feature is Set ON.
NO DECOMPRESSION DIVE MODE MAIN DISPLAY (FIG. 17)
The Resource Pro will enter the No Decompression Dive Mode when you descend deeper than 5
feet (1.5 meters). This mode is identified by the unique Wave/Dive Profile symbol (Fig. 17a).
Dive Time Remaining with the symbol NDL and Current Depth with the symbol FT (or
M) will be displayed.
The Bar Graphs will indicate nitrogen loading and ascent rate.
Pressing the button for 2 seconds will activate the Backlight.
No Decompression Dive Mode Alternate Display #1 (Fig. 18)
To view Alternate Display #1, momentarily press the button 1 time (< 2 seconds).
Elapsed Dive Time with the symbol BT and Maximum Depth with the symbols MAX and FT (or
M) will be displayed for 10 seconds.
No Decompression Dive Mode Alternate Display #2 (Fig. 19)
To view Alternate Display #2, momentarily press the button 2 times while viewing the Main Dis-
play, or 1 time while viewing Alternate Display #1.
Water Temperature with the graphic F (or C) and Time of Day with the symbol AM (or PM) will
be displayed for 10 seconds.
Fig. 19 - No Deco Alt #2
Fig. 17 - No Deco Main
Fig. 18 - No Deco Alt #1
BT
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
MAX
FT
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
AM
To Next Page
Loading...
Need help?
General
