32
Post Dive Plan Mode
After a dive, Plan Mode will show display adjusted No Decompression Limits (Fig. 25) based
upon your previous dive profiles
The Plan Mode will only display Depths/Times to the Maximum Depth allowed by the nitrogen
limit. The calculated dive times and the maximum allowed depth displayed will increase as the
real time Surface Interval increases after completion of a dive.
Log Mode
Information from your latest 50 dives is stored in the Log for viewing. After exceeding 50 dives,
the oldest dive in the Log will be overwritten by the most recent dive.
Log information will not be lost when the battery is removed/replaced, but factory service will de-
lete data.
Log Mode recalls dives in reverse order from the one most recently recorded back to the oldest of
the 50 dives stored. Your most recent dive will always be the first shown when Log Mode is ac-
cessed.
Each dive has two Log screens, Dive Identifier and Dive Data.
Dives are identified by the Dive Number (for that activation period) and Time started. The first
dive of a new Activation Period will always be #1.
Fig. 25 - Adjusted NDLs
NDL
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
MAX
FT
To Next Page
Loading...
Need help?
General
