13
Resource Pro
Remember that the rules you learned in your basic SCUBA certification course still apply to the
diving you will do while using a dive computer - some will become even more important. Tech-
nology is no substitute for common sense, and a dive computer only provides the person using it
with data, not the knowledge to use it.
WARNING: Inspect your Resource Pro prior to every dive, checking for
any signs of the entrance of moisture, damage to the button, or damage to
the LCD display. If these or other signs of damage are found, return the
unit to an Authorized Genesis Scuba Dealer. DO NOT attempt to use it
until it has received factory prescribed service.
CONTROL BUTTON
The Resource Pro's control button (Fig. 1a) allows you to select various settings and access spe-
cific information when you choose to see it.
On the surface the control button is used to activate the Resource Pro, access the Log mode, and
set Units of Measure, Hour Format, Time, and the Wet Activation feature.
The button can also be used to access an External Access mode which is used by the factory to
obtain calibration information.
Underwater, the button is used to view Alternate displays of information that revert to a Main
display after 10 seconds.
Fig. 1 - Control Button
a
To Next Page
Loading...
