Name: Genesis resource pro
Brand: Genesis
Rating: 5 (1 reviews)

To Next Page

To Previous Page

SURFACE SEQUENCE

While on the surface, the Resource Pro automatically scrolls through a Sequence of displays -

 Surface Mode for 3 seconds

 Time to Fly / Desaturate for 3 seconds (only after a dive)

 Plan Mode (each Depth/Time displayed for 3 seconds)

The Sequence repeats for 2 hours or until a dive is made or the button is pressed to access Log

Mode or Set Mode.

SURFACE MODE

Surface Mode is identified by the Surface Wave symbol (Fig. 11a).

Information displayed includes Surface Interval Time (Fig. 11b) with colon flashing, Dive Num-

ber (0 if no dive made that activation period - Fig. 11c), Air Temperature with the graphic F or C

(Fig. 11d), and Time of Day (Fig. 11e) with the AM or PM symbol (if set for 12 Hour Format).

NOTE: Time to Fly / Desaturate and Plan Mode are described later in this

manual.

Fig. 11 - Surface Mode

Questions and Answers:

Need help?

Do you have a question about the Genesis resource pro and is the answer not in the manual?

Genesis resource pro Specifications

General