41
Resource Pro
TAT
STOP
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
FT
WARNING: If you exceed certain limits, the Resource Pro will not be able
to respond with information to guide you to the surface. These situations
exceed tested limits and can result in loss of some Resource Pro
functions for 24 hours after the dive in which a Violation occurred. It is
important to understand each different Violation Mode and how to carry
out emergency procedures in the event that you enter one.
VIOLATION MODES
Violation Modes the Resource Pro can enter are termed Conditional, Delayed, and Immediate.
Permanent Violation Mode and Gauge Mode are continuations of these. While in Violation
Modes, the Backlight can be activated and Alternate Displays similar to those shown for Deco
Mode can be accessed using the button.
CONDITIONAL VIOLATION MODE
The unit will enter the Conditional Violation Mode if you ascend shallower than (Fig. 38a) the
Required Deco Ceiling Stop Depth displayed (Fig. 38b).
Total Ascent Time (TAT) and the Ceiling Stop Bar symbol will flash until you descend below the
Required Stop Depth.
If you descend below the Required Stop Depth before 5 minutes have elapsed, the Resource Pro
will continue to function in Decompression Dive Mode. In this case, no off-gassing credit will be
given, and for each minute above the Required Stop Depth 1
1
/
2
minutes of Penalty Time is added
to Required Stop Time and Total Ascent Time.
Fig. 38 - Conditional Violation
(< 5 min above a Deco Stop)
a
b
Flashing
To Next Page
Loading...
Need help?
General
