Genesis resource pro - After the First 2 Hours; To Access Other Modes or Enter Settings While in Fly;Desat Mode

34
AFTER THE FIRST 2 HOURS
Two hours after the last dive, the unit will no longer scroll through the Surface Sequence. In-
stead, the Fly/Desat screen (countdown timers) will be displayed continuously, giving the final
countdowns from 22:00 and 9:59 (hr:min) to 0:00 (Fig. 28A).
If the Wet Activation feature is set ON, the graphic H2O will appear on the screen if the unit is
Wet (Fig. 28B). This is an indication that the unit should be dried off prior to travel or storage.
To access other modes or enter settings while in Fly/DeSat Mode:
 press the button to reactivate the Surface Sequence.
 The Fly/Desat screen will appear in the Sequence and again be the only screen displayed
after 2 hours, if the button is not pressed.
Fig. 28A - Fly / DeSat Times
Responsible
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
Fig. 28B - Unit Still Wet
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O