33
Resource Pro
MAX
FT
BT
LOG
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
LOG
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
AM
To access the Log Mode (10 minutes after a dive):
press the button momentarily while the unit is scrolling through the Surface Sequence.
the first screen (Dive Identifier - Fig. 26) of the most recent dive will appear displaying
(from top to bottom) -
LOG symbol
Surface Interval Time prior to that dive (1:24) and Wave symbol
Dive Number for that activation period (2)
Temperature (68) - lowest recorded during that dive and graphic F (or C)
Time of Day that the dive started (10:25 AM) and symbol AM (or PM)
To view the second screen for that dive (Dive Data- Fig. 27):
press the button again momentarily. Displayed (from top to bottom) will be -
LOG symbol
Elapsed Dive Time (0:45) and symbol BT
Maximum Depth reached (128) and symbols MAX and FT (or M)
Ascent Rate Indicator - showing the maximum ascent rate maintained for 4
consecutive seconds during the dive
Nitrogen Bar Graph - showing tissue nitrogen loading at the time you surfaced from
the dive. It will also display the segment that reflects the maximum nitrogen loading
that was achieved during the dive (Fig. 27a).
To exit Log Mode and return to the Surface Sequence, press the button for 2 seconds.
Fig. 27 - Log Dive Data
Fig. 26 - Log Dive Identifier
a (flashing)
To Next Page
Loading...
Need help?
General
