36
CLEAR (RESET)
The Resource Pro is configured with a feature that allows calculations pertaining to a dive series in progress to be interrupted.
Activation of this feature will delete all data accumulated during the dive series necessary for planning a next dive and should
only be performed if the user plans to suspend diving for at least 24 hours.
This feature is present to provide institutional users of the computer a means to provide a "clean" computer to subsequent us-
ers without having to wait for the computer to complete all calculations in real time. This practice requires strict control to
ensure that the "clean" computer is not used by a diver that has been diving within the preceding 24 hours. Failure to follow
this practice could adversely affect the accuracy of subsequent calculations by failing to account for previous exposure to el-
evated nitrogen absorption.
WARNING: Do not attempt to activate the CLEAR (Reset) function on your
computer. Proper activation of this feature requires controlled procedures
and is restricted to authorized personnel.
WARNING: Improper activation of this feature could expose the user to
elevated risk of decompression sickness. This is a serious risk and could
result in injury or death.
WARNING: If the CLEAR (Reset) screen appears (Fig. 29), cease all
operation of the unit's button and wait until Surface Mode appears on the
display (2 minutes). If the unit shuts Off completely, all calculations for
repetitive dives will be cleared in which case you must wait at least 24
hours before resuming diving activity.
Fig. 29 - Clear
D
E
C
O
D
E
C
O
D
E
C
O
D
E
C
O
To Next Page
Loading...
Need help?
General
