Name: Genesis resource pro
Brand: Genesis
Rating: 5 (1 reviews)

To Next Page

To Previous Page

 Press and hold the button down for 2 seconds to save the selection, releasing it when the

Set Time screen appears. AM (or PM) and the Time of Day will be displayed with the

Hour value flashing (Fig. 14).

 Press and release the button repeatedly until the correct Hour value appears (1: to 12: or

0: 23:). Do Not hold the button depressed.

 Press and hold the button down for 2 seconds to save the selection, releasing it when the

Minute value flashes.

 Press and release the button repeatedly until the correct Minute value appears (:00 to

:59). Do Not hold the button depressed.

 Press and hold the button down for 2 seconds to save the selection, releasing it when the

Set Wet Activation screen appears. The graphics H2O and ON (or OFF) will be dis-

played with ON (or OFF) flashing (Fig. 15).

 Momentarily press and release the button (< 2 seconds) to toggle between ON and OFF.

WARNING: When Wet Activation is set OFF, the Resource Pro must be

activated by pushing the button prior to commencing a dive.

 Press and hold the button down for 2 seconds to save the selection, releasing it when the

Surface Mode screen appears.

Fig. 15 - Set Wet Activation

Fig. 14 - Set Time

Questions and Answers:

Need help?

Do you have a question about the Genesis resource pro and is the answer not in the manual?

Genesis resource pro Specifications

General