WP21 Series Operation Manual Chapter 5 Routine Operation
28
will automatically measure the next patient sample under the same test
item.
Figure 5-15
If the item is tested by the kinetic method, the screen will dynamically
display the reaction curve during measurement of the standard and
sample, as illustrated in Figure 5-16:
Figure 5-16
The results are displayed in the same way as other measurement
methods.
5.3.6 Standby status
If there are no operations within 30 minutes, the instrument will be in
standby status and the light-source lamp will turn off. The screen is
To Next Page
Loading...