WP21 Series Operation Manual Appendix
72
Figure 13-1 Structure of the peristaltic pump
Appendix 3 Clean the cuvette
1. Prepare a glass of distilled water or alcohol and place the sample
tube into it.
2. Press “6” on the main interface to open the “Maintain” window and
then press “5” to enter the “ADC ADJ” interface.
3. Press “1” to start cleaning.
4. For alcohol cleaning, after completion, use distilled water to wash
twice.
5. After cleaning, press “Exit” to return to the main menu.
To Next Page
Loading...