Genrui WP21B - Sample Measurement Process

WP21 Series Operation Manual Chapter 5 Routine Operation
20
5) Calibration should be performed during analysis to ensure the
result accuracy.
6) The wastes generated should be regarded as medical wastes for
disposal.
5.3 Sample measurement
Press the number key “1” on the main menu to open the “Item Choice”
window, as illustrated in Figure 5-1:
Figure 5-1
Enter the desired item No. (e.g. “1 ALT”) to enter the measurement
interface of this item, as illustrated in Figure 5-2:
Figure 5-2