WP21 Series Operation Manual Chapter 7 Daily Use and Maintenance
62
2) If the instrument needs to be moved, relocated, presented, lent or
repaired, thoroughly disinfect its surface to minimize the biological
harm. If the instrument is crashed or dropped, whether there is obvious
damage on its surface or inside, stop using it and contact Genrui or
local representative.
3) If there is an instrument breakdown after the warranty period, ask
Genrui’s service engineer, reparation engineer in the device
department of the hospital or other qualified engineers to repair it;
otherwise, there is the risk of electric shock. Please contact Genrui
before reparation.
4) When the expected service life of this instrument ends (about eight
years), it is recommended to stop using it or resume using after overall
troubleshooting, maintenance and care by Genrui.
5) This analyzer can only be used by personnel who are trained and
authorized by Genrui or its representative; otherwise, the protection
provided by the instrument may be impaired or the test results may be
significantly affected.
7.3 Preventive maintenance and inspection for safety
purpose
1) Check if the power cable is connected and well grounded before
startup.
2) Check if the isoelectric grounding rod is well connected before
startup.
3) Strictly comply with the maintenance requirements in the “Daily Use
and Maintenance” section to perform the instrument maintenance and
service.
7.4 List of replaceable components
1) List of replaceable parts and consumable materials
Consumable materials: Printing paper, see Appendix 1
To Next Page
Loading...