Administrator Mode
63
4 4
Select Enable and click ROI Setting to configure:
1. On the popup window, use your mouse and draw directly on the live
view to specify a region.
Figure 4-3
2. To set up a region with enhanced clarity, select ROI, select High,
Medium or Low using the drop-down list and then drag on the
image to outline a region.
3. Click Apply to apply the configurations.
[GOP Structure and Length] Set the maximum number of seconds
between every key frame.
[Video Slice Mode] Note this function is only supported by firmware V2.12
or earlier and is not supported by Target Series and GV-IPCAM H.265.
Corrects the display mode of the camera when it is displayed on third-party
NVR/DVR software and the live view is incomplete or broken. Select
Single Slice or Multi Slice to display the live view. The default is Auto.
[H.264 Video Entropy Coding Setting] Note this function is not supported
by GV-IPCAM H.265, GV-BX12201 and Target Series. By default, the
entropy coding is set to CAVLC. To change it to CABAC, click and select
from the drop-down list.
To Next Page
Loading...
Need help?
General