Bullet Camera
9
4. If you want to insert a micro SD card, follow the steps below.
A. Loosen the fixing screw.
Fixing Screw
Figure 9-18
B. Slightly pull out the camera module.
C. Insert a micro SD card (SD/SDHC, version 2.0 only, Class 10)
into the memory card slot.
Memory Card Slot
Figure 9-19
D. Push the camera module back and fasten the fixing screw.
5. Insert a new silica gel bag to the camera module and fasten the
camera’s cover within 2 minutes of opening the silica gel bag package.
109
To Next Page
Loading...
Need help?
General
