Getting Started
19
19.1.2 Configuring the IP Address
Follow the steps below to configure the IP address.
1. Open your web browser, and type the default IP address
http://192.168.0.10
.
2. In both Login and Password fields, type the default value admin. Click
Apply.
3. In the left menu, select Network and then LAN to begin the network
settings. This page appears.
Figure 19-4
4. Select Dynamic IP address, Static IP address or PPPoE and type
the required network information.
5. Click Apply. The camera is now accessible by entering the assigned
IP address on the web browser.
257
To Next Page
Loading...
Need help?
General
