PTZ Camera
12
Starting and Stopping Autopan
To start an Auto Pan, click the Option button (No. 6, Figure 12-15), select
Auto and select a desired Auto Pan number. The PTZ Camera will first
return to the starting position of the selected Auto Pan and proceeds with
the selected Auto Pan movement.
To stop Auto Pan, click the
Option button (No. 6, Figure 12-15), select
Auto and select Autopan Stop. Alternatively click on a Pan / Tilt Control
button (No. 2, Figure 12-15) or the
Home button (No. 3, Figure 12-15).
Rebooting the Camera
When the system crushes and fails to respond to the PTZ control panel,
reboot the camera.
1 Open the VISCA OSD Configuration dialog box.
2 Click the
Motor Reset button to reboot.
3 Wait until the camera has panned and tilted its full range and
returned to the home point.
165
To Next Page
Loading...
Need help?
General
