What to do if Getac M230 Laptop cannot read a disc?
First, make sure the disc is correctly seated in the tray with the label facing up. If it's still not reading, ensure the disc isn't dirty and clean it with a disc cleaning kit. Also, verify that the optical drive driver is correctly installed and that the computer supports the disc or the files contained on it.
Why does my Getac Laptop modem not work?
Make sure that the modem driver is correctly installed and the telephone line is properly connected. Also, verify that the COM port in the communication software is correctly set. Finally, ensure that power management is turned off.
What to do if the external monitor displays nothing when connected to Getac Laptop?
First, ensure that the monitor is turned on and that its signal cable is properly connected. If both are fine, switch the display to the monitor by pressing the Fn+F9 hot key or changing the display settings in Display Properties.
What to do if Getac M230 Laptop keyboard does not respond?
Try connecting an external keyboard to your laptop. If the external keyboard works, it's possible that the internal keyboard cable is loose. In this case, contact an authorized dealer for assistance.
How to improve poor transmission quality on Getac M230 Laptop?
If you are experiencing poor transmission quality, the computer may be out of range, so move it closer to the Access Point or WLAN device. Check for high interference and move the computer away from devices causing radio interference, such as microwave ovens or large metal objects. Plug the computer into a different branch circuit than the affecting device. For further assistance, consult a dealer or experienced radio technician.
What to do if I cannot access the network on my Getac M230 Laptop?
First, make sure that the LAN driver is correctly installed. Next, check that the LAN cable is properly connected to both the RJ-45 connector and the network hub. Verify that the network configuration is appropriate and that the username and password are correct.
What to do if nothing appears on the Getac M230 Laptop screen?
If the power-on indicator isn't lit, check the electrical outlet, plugs, and power cords. If the power button doesn't respond to a light touch, press it firmly. If using battery power, ensure it has a charge and is correctly installed. The screen might be off due to power management; press any key. The brightness might be too low; increase it using the Fn+F6 hot key. The display output might be set to an external device; switch it back to the LCD by pressing Fn+F9 or changing settings in Display Properties. You can also try turning the computer off, waiting a few seconds, and then turning it back on.
What to do if Getac Laptop does not turn on?
If using external AC power, ensure the AC adapter is correctly and securely connected and that the electrical outlet works properly. If using battery power, ensure the battery is not discharged.
General| Category | Laptop |
|---|---|
| Brand | Getac |
| Model | M230 |
| Display Size | 13.3 inches |
| Connectivity | Wi-Fi, Bluetooth |
| Battery Life | Up to 8 hours |
| RAM | 8GB |
| Storage | 256GB SSD |
| Graphics | Intel Iris Xe Graphics |
| Ports | USB, HDMI, Serial Port |
| Ruggedness | MIL-STD-810G, IP65 |
| Durability | vibration and drop resistant |
Guides you through procedures for getting the computer ready for operation.
Details on how to connect the computer to AC power for initial startup.
Explains the process for turning the computer on and off.
Explains how to start, stop, and resume the computer using various modes.
Explains the computer keyboard layout, special keys, and functions.
Explains how to use the touchpad for pointing and selection, including gestures.
Instructions for using the touch-sensitive screen as an alternative input method.
Describes the hard disk drive, its function, and the HDD heater feature.
Details the Combo or DVD Dual drive, its capabilities, and laser safety.
Overview of the computer's video capabilities, including display types and features.
Details on various communication features like LAN, WLAN, Modem, Bluetooth, and GPS.
Details on connecting to a network using the internal LAN module and RJ-45 connector.
Information on the internal wireless LAN card, features, and standards.
Details on using the internal 56 K fax/data modem for communication.
Information on integrated GSM/GPRS features for wireless data transmission.
Overview of Bluetooth capability for short-range wireless communication.
Details on the GPS feature and its use with third-party navigation software.
Details on the internal rechargeable battery, its capacity, and operating time.
Procedure for charging the battery pack, including indicators and charging times.
Step-by-step instructions for removing and replacing the primary battery.
Procedure for installing an optional secondary battery pack for extended operation.
Details ACPI power management features for reducing power consumption.
Instructions for connecting an external display monitor to the computer's VGA port.
Guide to connecting USB devices like cameras, printers, and mice to the computer.
Procedure for connecting parallel devices such as printers using the parallel port.
Instructions for connecting serial devices like mice or modems via the serial port.
Instructions for upgrading the computer's system memory (RAM).
Introduction to BIOS Setup Utility and when to use it for system configuration.
Explains when and how to perform system recovery to restore factory defaults.
Guide to installing drivers and utilities for Windows XP.
Guide to installing drivers and utilities for Windows Vista.
Methods to safeguard computer data and the system, including anti-virus and passwords.
Advice on charging, using, and storing battery packs to maximize lifespan.
Helpful steps to follow before taking further actions when encountering computer problems.
Troubleshooting steps for battery not charging or reduced operating time.
Solutions for issues connecting to or ending Bluetooth connections.
Troubleshooting for screen issues like nothing appearing or dim characters.
Solutions when the computer does not recognize a newly installed device.
Troubleshooting for hard disk drive error messages and slow operations.
To Next Page
