EasyManua.ls Logo

Getac Notebook computer - Using the Card Reader

Getac Notebook computer
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Expanding Your Computer 4-13
Using the Card Reader
NOTE:
z To use the Card Reader, the Card Reader driver supplied with your computer must
be installed.
z If your hard disk is divided into several drives, make sure that all drives have been
formatted before using the Card Reader. Otherwise, you may encounter problems
when using the Card Reader.
z You can use only storage cards. Your Card Reader does not support cards with I/O
(input/output) functions such as a wireless network card or Bluetooth wireless card.
Your computer has a Card Reader. The Card Reader is a small drive for
reading from and writing to removable storage cards (or called memory
cards). The Card Reader supports the MultiMediaCard (MMC), Secure
Digital (SD), Memory Stick (MS), and Memory Stick PRO (MS PRO)
cards.
Shown next are the appearance and size of each card type for your
reference.
Type MMC Card SD Card MS / MS PRO Card
Appearance
Size
24
×32×1.4
(mm)
24×32×2.1
(mm)
21.5×50×2.8
(mm)
To insert a storage card:
1. Locate the Card Reader slot on the left side of the computer.

Table of Contents

Related product manuals