Getnet GR-724W - Setup Procedure for ‘Dynamic IP’

40
2-5-1 Setup procedure for ‘Dynamic IP’:
Here are descriptions of every setup items:
Host Name (1): Please input host name of your computer, this is
optional, and only required if your service provider
asks you to do so.
MAC Address (2): Please input MAC address of your computer, if your
service provider only permits computer with certain
MAC address to access internet. If you’re using the
computer which used to connect to Internet via
cable modem, you can simply press ‘Clone Mac
address’ button to fill the MAC address field with
the MAC address of your computer,
After you finish with all settings, please click ‘Apply’ (3); if you want to
remove and value you entered, please click ‘Cancel’.
After you click ‘Apply’, the following message will be displayed on your
web browser:
1
2
3