63
2-7-1-2 Setup procedure for ‘Station-Infrastructure’:
In this mode, you can connect the router to Ethernet device such us TV,
Game player, HDD&DVD to enable the Ethernet device be a wireless
station and join to a wireless network through an access point or AP
router.
Here are descriptions of every setup items:
Band (2): Select the band you want to use.
SSID (3): This is the name of wireless network. You can type
the SSID of the network you would like to connect
here.
Site Survey (4): When you use this wireless router as a wireless
station for Ethernet network device to have wireless
capability, you have to associate it with a working
access point. Click ‘Select Site Survey’ button, then
a “Wireless Site Survey Table” will pop up. It will
list all available access points near by. You can
select one access point in the table and it will join
wireless LAN through this access point.
TIPS: You can try to change channel number to another one if you
think the data transfer rate is too slow. There could be some other
wireless routers using the same channel, which will disturb the radio
communication between wireless client and the wireless router.
1
2
3
4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
