71
big space, you may not have to set output power to
100%. This will enhance security (malicious /
unknown users in distance will not be able to
reach your wireless router).
WMM (12): The short of Wi-Fi MultiMedia, it will enhance the
data transfer performance of multimedia contents
when they’re being transferred over wireless
network. If you don’t know what it is / not sure if
you need it, it’s safe to set this option to ‘Enable’,
however, default value is ‘Disable’.
After you finish these wireless settings, please click ‘Apply’ button,
button, and the following message will be displayed on your web
browser:
Please click ‘Continue’ to back to previous setup menu; to continue on
router setup, or click ‘Apply’ to reboot the router so the settings will take
effect (Please wait for about 30 seconds while router is rebooting).
2-7-3 Wireless Security
It’s very important to set wireless security settings properly! If you don’t,
hackers and malicious users can reach your network and valuable data
without your consent and this will cause serious security problem.
To set wireless security settings, Please click ‘Wireless’ menu on the left
of web management interface, then click ‘Security Settings’, then follow
the following instructions to set wireless security settings:
To Next Page
Loading...
