48
If you want to reset all settings in this page back to previously-saved
value, please click ‘Cancel’ button.
2-5-6 Setup procedure for ‘Telstra Big Pond’:
This setting only works when you’re using Telstra big pond’s network
service in Australia. You need to input:
User Name (1): Please input the user name assigned by Telstra.
Password (2): Please input the password assigned by Telstra.
Assign login Check this box to choose login server by yourself.
server manually (3):
Server IP Address (4):Please input the IP address of login server here.
When you finish with all settings, click ‘Apply’ (5) button and the
following message will be displayed on your web browser:
1
2
3
4
5
To Next Page
Loading...
