82
Configure Click ‘Start PBC’ to start Push-Button style WPS
by Push Button (4): setup procedure. This wireless router will wait for
WPS requests from wireless clients for 2 minutes.
The ‘WLAN’ LED on the wireless router will be
steady on for 2 minutes when this wireless router is
waiting for incoming WPS request.
Configure Please input the PIN code of the wireless client you
by client wish to connect, and click ‘Start PIN’ button.
PinCode (5): The ‘WLAN’ LED on the wireless router will be
steady on when this wireless router is waiting for
incoming WPS request.
To Next Page
Loading...
