MDE-4699L Applause™ Media System Installation, Service, and Parts Manual · June 2017 Page C-11
Configuring Network for Gilbarco Dispenser IP Addresses
Configuring Site Server IP Addresses for Applause
Media System (when IP Addresses Are Changed)
Hide Network Settings
From the Network Config menu, press 5 > Enter. The Hide Network Settings screen appears
before the Network settings are hidden.
Figure C-15: Hide Network Settings
Hide Network Settings
WARNING: Network settings cannot be changed
or viewed once hidden. The network settings will
be reset to factory defaults if it is decided to
unhide them later.
Enter = Hide and Exit
Cancel = Abort
Network Settings (Hidden)
From the Network Config menu, press 6 > Enter. Following screen appears. This option
enables you to unhide the applied network settings.
Figure C-16: Network Settings (Hidden)
Network Config
Network settings hidden
1. Unhide Network Settings
Cancel = Exit
Press 1 > Enter. Following warning appears. Unhiding Network Settings resets IP addresses
to factory values.
Figure C-17: Unhide Network Settings
Unhide Network Settings
WARNING: Network settings are currently hidden.
If you unhide them the settings will be erased and
reset to factory defaults.
Enter = Unhide and Exit
Cancel = Abort
To Next Page
Loading...
Need help?
General