Installing and Configuring Secondary NIC in Applause Media System Site Server Configuring Secondary NIC
Page F-2 MDE-4699L Applause™ Media System Installation, Service, and Parts Manual · June 2017
5 Install the secondary NIC.
6 Reinstall the Applause Media System Site Server top cover and restore power.
Note: Non-default and secondary NIC settings must be provided by the retail customer’s IT
department. The Gilbarco TAC cannot provide these settings.
Configuring Secondary NIC
To configure the secondary NIC in the Applause Media System Site Server, proceed as
follows:
1 Connect to the Applause Media System Site Server via laptop.
2 Navigate to the Network Setup page.
3 Enter the secondary NIC IP configuration information.
4 Disable routing between NIC if required by the site configuration.
5 Save the configuration and restart the Applause Media System Site Server.
To Next Page
Loading...
Need help?
General