Introduction
1
1-4 223 Sample Changer User’s Guide
Unpacking
Accessories
Based on your requirements, you also received additional accessories, ordered separately:
Dilutor
Choose between an optional 402 Syringe Pump, Minipuls Evolution® Peristaltic Pump, or MINIPULS® 3 Peristaltic Pump to add
aspirating and dispensing flexibility.
RS-232 Serial Cable
Use an RS-232 cable to transfer information between the sample changer and a computer.
GSIOC Cable
Use a GSIOC cable to connect other instruments to the sample changer and then control all from one computer.
Vertical Arm
A vertical arm is required, but not included, as there are three options to choose from:
Probe Holder Guide Kit
A probe holder guide kit is required, but not included, as there are two options to choose from:
Part Number Description
F410511 402 Single Syringe Pump
Part Number Description
36083122 SERIAL CABLE, 9-PIN/25-PIN
Part Number Description
36078143 Shielded GSIOC cable, 30"
Part Number Description
190610 183 mm vertical arm
190611 123 mm vertical arm
190613 56 mm vertical arm
Part Number Description
19061040 Probe holder/guide kit; includes probe holder,
guide and probe connecting nut (part number
27072001) for 1.5 mm outer diameter probes.
19061041 Probe holder/guide kit; includes probe holder,
guide and probe connecting nut (part number
23074002) for Teflon probes.
To Next Page