Appendix
A
A-4 223 Sample Changer User’s Guide
Replacement Parts and Accessories
Transfer Tubing
Rinse Stations and Accessories
Control
Part Number Description
499424012 TUBING, COILED, 1 mL, 0.8 mm ID
499421202 TRANSFER TUBING,1.5 mL FEP, 0.8 mm x10FT
499474032 TUBING, COILED, 3 mL, .8 mm ID, FEP
499474052 TUBING, COILED, 5 mL, 1.5 mm ID, FEP
499474102 TUBING, COILED, 10 mL, 1.5 mm ID X 24FT
499474252 TUBING, COILED, 25 mL, 1.5 mm ID X 50FT
F1410153 Coupling for 1/4"-28 fitting, PVDF
27072001 Probe connecting nut for 1.5 mm probe; connects probe and transfer tubing
23074002 Probe connecting nut for Teflon probe; connects probe and transfer tubing
Part Number Description
2707251L Rinse station with 85 mm rinsing well
270726 Rinse station
2707261L Rinse station with 45 mm rinsing well
2707263 Polypropylene rinsing well, 45 mm
2707253 Polypropylene rinsing well, 85 mm
2707252 Polypropylene rinsing well, flow-through
29501017 Cable ties to connect drain tubing to rinse station drain; package of 6
470331206 Tubing for flow-through rinsing well (3/16 ID x 5/16 OD); per foot
470321803 Tygon tubing for rinse station drain (5/32 ID x 7/32 OD); per foot
470343706 Tygon tubing for polypropylene tray drain (5/16 ID x 7/16 OD); per foot
13420034 Isoversinic drain tubing for rinse station drain (7 mm ID); per foot
4701177592 Rinse station tubing, Isoversinic, 4.5 mm ID (6 mm OD), per foot.
Part Number Description
2106171
706 GSIOC Device Driver Software (Programmer's Tool Kit) for MS DOS-based systems. Includes tools for
programmers to write computer programs to control Gilson instruments: the GSIOC Device Driver to
extend MS DOS or PC DOS to use Gilson devices, and sample programs written in BASICA, Turbo Pascal,
Microsoft Pascal and C which demonstrate how to write programs to address Gilson instruments. Use
with Model 605 RS-232 Adapter or 506C System Interface Module.
36083122 Serial Cable, 9-pin/25-pin (most common)
To Next Page