Gilson 223 - Probes for 123 MM Vertical Arm-Stainless Steel; Probes for 123 MM Vertical Arm-Titanium; Probes for 123 MM Vertical Arm-Teflon; Probes for 56 MM Vertical Arm-Stainless Steel

Appendix A
A-2 223 Sample Changer User’s Guide
Replacement Parts and Accessories
Probes for 123 mm Vertical Arm—Stainless Steel
Probes for 123 mm Vertical Arm—Titanium
Probes for 123 mm Vertical Arm—Teflon
Probes for 56 mm Vertical Arm—Stainless Steel
Probes for 56 mm Vertical Arm—Titanium
Part Number Description
27067211 Beveled-tip probe; 160.5 x 1.5 x 1.1 mm ID. Requires probe holder/guide kit (part number 19061040).
27067213 Tapered-tip probe; 160 x 1.5 x 1.1 mm ID. Requires probe holder/guide kit (part number 19061040).
27067212
Side-entry probe (septum-piercing); 160.5 x 1.5 x 1.1 mm ID.
Requires probe holder/guide kit (part number 19061040).
27067272
Beveled-edge probe for use with transfer ports (not septum-piercing); 160.5 x 1.5 x 1.1 mm. Requires
probe holder/guide kit (part number 19061040).
27067235
Beveled-edge probe (septum-piercing); 162 x 0.7 x 0.42 mm. Requires probe sleeve (part number
27067236) and probe holder/guide kit (part number 19061040).
27067231
Beveled-edge probe (not septum-piercing); 162 x 0.7 x 0.42 mm. Requires sleeve (part number
27067232) and probe holder/guide kit (part number 19061040).
27067276
Flat-tipped probe for drop transfer; 165 x 0.7 x 0.4 mm. Requires probe sleeve (part number 27067277).
Requires probe holder/guide kit (part number 19061040).
27067238
Grooved septum-piercing probe, 162 x 0.7 x 0.4 mm ID. Requires 1.6 mm probe guide insert
(part number 27067239).
Part Number Description
27067237
Titanium beveled-edge probe (septum-piercing); 162 x 0.7 x 0.42 mm.
Requires probe sleeve (part number 27067236). Requires probe holder guide/kit (part number
19061040).
Part Number Description
27067218
Teflon-coated probe for non-metal applications; 157.5 x 0.9 mm ID (22 GA).
Requires probe holder/guide kit (part number 19061041).
Part Number Description
27067131
Beveled-edge probe (septum-piercing); 95 x 0.7 x 0.42 mm. Requires probe sleeve (part number
27067132) and probe holder guide/kit (part number 19061040).
27067113 Constricting tip probe; 93.5 x 1.5 x 1.1 mm. Requires probe holder/guide kit (part number 19061040).
Part Number Description
27067133
Beveled-edge probe (septum-piercing); 95 x 0.7 x 0.42 mm. Requires probe sleeve (part number
27067132) and probe holder guide/kit (part number 19061040).