223 Sample Changer User’s Guide A-5
Appendix
A
Replacement Parts and Accessories
Safety Shield
Accessories
Replacement Parts
Part Number Description
1907175 223 Safety Shield kit. Encloses sides and front of 223 working area.
Part Number Description
1907151 Holder for four standard or deep-well microplates
1907142 Port bar 223 antlers code 30-series
1907143 Port bar 223 antlers code 0-series for one Code 0, 7, 8, or 9 rack
2704429 Thermostating cuvette: one required per Code 30-series thermostated rack.
2949694 Rack Heightener for series 30P racks
2749767 Injection port for 221/222 XL Liquid Handlers and transfer port for the 223 Sample Changer.
49942107 0.8 mm ID Teflon Tubing; 10 feet plus 2 end fittings. To connect filler port to other instrument.
190711
Diverting valve assembly for 223 Sample Changer. Includes mounting bracket, tubing, and two
tubing/cable clips
2954829 1 mL sealing caps for transfer ports 50/P
190710 Tray spacers for installing polypropylene tray in upper position, package of 2
709910206 2-conductor interconnect wire, 6 feet.
Part Number Description
1907141 Port bar for mounting rinse station(s), transfer port(s), and filler port
190712 Level sensing cable
190713 Tubing/cable support rod
2507023 Tubing retaining clip for support rod
638308513 Terminal block connector, 8-pin
638310513 Terminal block connector, 10-pin
36078143 Shielded GSIOC cable, 30"
6730204007 Fuse; 2 amp (250V) T-type, 5 mm x 20 mm
36083122 Serial cable, IBM AT-type, 9-pin female to 25-pin male
19041001 Generic black pan with drain assy
To Next Page