223 Sample Changer User’s Guide 1-9
Introduction
1
Technical Specifications
Probe Positioning
Performance
Accuracy:
±1 mm in the XYZ dimensions
Repeatability:
±0.25 mm in the XYZ dimensions
Probe Rinse Probe rinsing occurs through a dedicated rinse station for rinsing the inside and outside
of the probe
Number of Racks Up to four Code 20- or Code 30-series racks
Safety and Compliance The sample changer has been certified to safety standards specified for Canada, Europe,
and the United States. Refer to the instrument rear panel label and the Declaration of
Conformity document for the current standards to which the instrument has been
tested.
Sampler Type X/Y/Z with stationary rack design
Vertical Punch Strength 1 kg (2 lbs.)
Weight 18.6 kg (41 lbs.)
223 Sample Changer (Continued)
Technical Specification Definition
Technical Specifications - 223 Sample Changer
(Page 2 of 2)
To Next Page
Loading...
