223 Sample Changer User’s Guide Safety-1
Safety
The instrument is intended to be used in a laboratory by trained technical personnel. For safe and correct use, both operating
and service personnel should follow the instructions contained in the user’s guide when installing, cleaning, and maintaining
the instrument.
The following safety precautions must be observed during all phases of operation, service, and repair of the instrument. Failure
to comply with these precautions or with specific warnings elsewhere in the user’s guide violates safety standards of design,
manufacture, and intended use of the instrument. Gilson assumes no liability for the customer’s failure to comply with these
requirements.
The instrument has been certified to safety standards required in Canada, Europe, and the United States. Refer to the rear panel
label on the instrument or the Declaration of Conformity document for the current standards to which the instrument has been
found compliant.
To Next Page
Loading...
