30
PCM Down Sampling
If your amplifier is not capable of reproducing a 96kHz signal, PCM
downsampling should be set to On.
1Open “Initial Setup” menu
Press the SETUP button while the DVD is in Stop mode.
2 Select “DVD”
Use the
/
buttons to highlight “DVD”, then press ENTER
to select.
3 Select “Audio”
Use the
/
buttons to highlight “Audio”, then press ENTER to
select.
4 Set “PCM Down Sampling”
Use the
/
buttons to highlight “PCM Down Sampling”, then
press the
button to select one of the following options:
• On - When a 96kHz audio disc is played, it will be downsampled
and output at 48kHz.
• Off – When a 96kHz disc is played, it will be output at 96kHz.
To Next Page
Loading...
