31
TV Aspect Ratio
Set the aspect ratio (length x width) of your TV screen so the DVD
player will display movies at the appropriate size for your
television. Choose from standard, letterbox, or widescreen format.
1Open “Initial Setup” menu
Press the SETUP button while the DVD is in Stop mode.
2 Select “DVD”
Use the
/
buttons to highlight “DVD”, then press ENTER to
select.
3 Select “Display”
Use the
/
buttons to highlight “Display”, then press ENTER to
select.
4 Set “TV Aspect”
Use the
/
buttons to highlight “TV Aspect”, then press the
button to select one of the following options:
• Widescreen - Allows you to view the full 16:9 picture on a
widescreen television.
• Letterbox - Displays the full width of widescreen movies on a
standard 4:3 television. As a result, black bars will appear at the
top and bottom of the screen.
• Pan-Scan - The familiar way of watching DVD and VHS movies,
this method selectively crops (by panning and scanning to keep
the most important part of the picture visible) widescreen movies
to fit a standard 4:3 television screen.
To Next Page
Loading...
Need help?
General
