37
860-7200-18 DTU DTB Service & Maintenance Manual
Drive bearings (left side of front pivoting conveyor, 3 in total
beneath holes in cover plates)
Drive bearings (right side of front pivoting conveyor, 3 in total
beneath holes in cover plates)
Drive bearings (left side of front pivoting conveyor, 3 in total
beneath holes in cover plates)
1.6
1.6
1.6
LOCATION: Transition Plates
ITEM PART INTERVAL
Front Metal
Transition Plates
Every 2,000
hours
GREASE
FITTING TYPE QTY
None
White lithium grease such
as Unival #8631-705
0�04 oz
NOTES
Re-lubricate the bushing fastened to the underside of
the middle plate and the slot in the middle plate (front
metal transition plates). Lockout required - Remove (7)
M5 FHSCS from top plate to access�
Transition plate bushing (remove 7 screws to remove top plate
and middle plate)�
3.7
Transition plate bushing on underside of the middle
transition plate
3.7
3.7
To Next Page
Loading...