ntpCliSyncSrvTable ►
A table that contains all the servers used for synchronization and information. First
entry in the table is server being used for synchronization. Second entry is the pre-
ferred second server, etc. Each entry has the following format:
ntpCliSyncSrvRank: ►
rank of the server. Server of rank 1 is used for synchronization.
ntpCliSyncSrvAddress ► :
IP address of the server.
ntpCliSyncSrvAccuracy: ►
Accuracy of the server as returned in the NTP frame (something like 2^-x se-
conds).
ntpCliSyncSrvUpAccuracy (Gorgy Timing server only) ►
Accuracy of the server as returned during auto-detection stage.
ntpCliSyncSrvUpSrvLoad (Gorgy Timing server only) ►
Load of the server (average number of requests per second) as returned during
auto-detection stage.
ntpCliSyncSrvPrefered (Gorgy Timing server only) ►
A number that indicates a user-dened rank attached to this server. When auto-de-
tection is activated, the LEDI Network IN takes the server with higher rank.
5. SNMP INTERFACE
To Next Page
Loading...