Gorgy Timing LEDI NETWORK iTS - 1. INTRODUCTION; 1.1. Quick installation; 1.2. Set-up your product; 1.3. Basics

69
MDE-LEDInetworkITS-server-4078V1.3
1. INTRODUCTION
This document is a user’s guide for the LEDI Network ITS
®
, LEDI Network DCLS
®
and LEDI
Network NTP Server
®
. These products are accurate time centers, easily congurable with
their outputs and dual synchronization inputs (such as GPS, NTP, IRIG B AC, IRIG B DC)
and dual power supply (230VAC and 18-72VDC). The core of time base is made with a
10-9 high accurate OCXO.
The purpose of these devices is to synchronize one or several product using a synchro-
nization signal, such as IRIG B DC, IRIG B AC, NTP, DCF or congurable Pulse (PPS,
PPM…), RS232, RS422, RS485. Using the LEDI Network ITS
®
, LEDI Network DCLS
®
and
LEDI Network NTP Server
®
provides you with several advantages:
► You can use the installed network architecture with the well-known protocols
Ethernet+TCP/IP.
► Simplied set-up.
► Easy remote conguration and diagnostic.
► The product is a 19” 1U rack that can be easily installed on your installation.
► It provides up to 12 congurable outputs in 1U for the ITS and 16 for the DCLS.
► 4 congurable and independent outputs per card.
☛ Jump directly to section 1.1. for quick installation
ENGLISH