Gorgy Timing LEDI NETWORK iTS - 4.2. DESCRIPTION OF THE WEB INTERFACE; 4.2.1. Main screen

89
MDE-LEDInetworkITS-server-4078V1.3
4.2. DESCRIPTION OF THE WEB INTERFACE
4.2.1. Main screen
This is the screen that appears when accessing the WEB site of the LEDI Network ITS/
DCLS/NTP Server. The rst four buttons on the left of the screen provide an access to
the following panels:
► Standard: information about the product and conguration of network parameters.
See part 2.2.
► State : Current working state of the product
► SNMP: conguration of SNMP parameters.
► NTP: diagnostic and conguration of the NTP software behavior.
► Input: offset from input time code, autonomy and autonomous running mode con-
guration.
► Output: diagnostic and conguration of output cards and display.
►  : Download a new software release
The Submit button updates immediately the LEDI Network ITS/DCLS/NTP Server
conguration. The conguration is stored permanently in an EEPROM.
4. WEB INTERFACE
WARNING. Some parameters cannot be modied without restarting
the device. If you change these kinds of parameters and click on
the button Submit, the device restarts with the new parameters
and needs some seconds before re-enable its output and generate
NTP code.
ENGLISH