70
MDE-LEDInetworkITS-server-4078V1.3
1. INTRODUCTION
1.1.QUICK INSTALLATION
This part contains the minimum information for the set-up of the LEDI Network ITS
®
, LEDI
Network DCLS
®
and LEDI Network NTP Server
®
. You can found additional information in
part 1.3.
The package must contains the following items:
The product itself: a 19” 1U rack.
► The name of this product is LEDI NETWORK ITS or DCLS or NTP SERVER
which is written on the front side of the rack.
► The code and conguration of the product can be checked on the identication
stamp put on top or backside of the product. It must be 92114/opt or 92117/opt
or 92100/opt (where opt depends on the product options).
A power supply cable ().
A 3 pins connector for DC power input.
A network cable.
A CDROM that contains set-up and management tools.
☛ Contact your dealer if one of the items above isn’t in the package
To Next Page
Loading...