To Next PageTo Next PageWhat to do if the GOWEIL Accessories electric motor has no function?
If the electric motor of your GOWEIL Accessories is not working, there could be several reasons: * The electric power supply might be missing. In this case, attach the supply cable to the machine. * The fuse could be defective. Replace the fuse in the control cabinet. * The connecting cable might be damaged. Replace the connecting cable.
Why does the GOWEIL Accessories electric motor turn off after a short period of time?
The electric motor of your GOWEIL Accessories might be turning off after a short period due to the thermal protection being tripped or active. Check the plug and ensure the electric motor is connected properly as specified in the circuit diagram.
General| Brand | GOWEIL |
|---|---|
| Model | MS 100 |
| Category | Accessories |
| Language | English |
Defines machine purpose, warns against misuse, and outlines operator's safety duties and regulatory compliance.
Details specific risks: moving parts, noise, hot surfaces, springs, sharp edges, and dirt.
Explains safety components like emergency stop buttons and their function.
Procedure to prevent accidental machine startup during maintenance or work.
Safety precautions, initial setup, and startup procedures before operation.
Detailed steps for correctly positioning knives for sharpening using the clamping device.
Detailed steps on how to adjust the grinding and rotary units for various radii.
Instructions for adjusting the grinding angle and setting the rotation limiter for precise grinding.
Important pre-operation information and step-by-step guide for sharpening knives.
Safety precautions for troubleshooting and a table listing common faults and remedies.
Detailed steps for diagnosing and resolving machine issues, including component replacement.
