GOWEIL MS 100 - Connections; Work and Hazard Areas; Electrical Connections

To Next Page

To Previous Page

Knife sharpener MS 100

Design and function

10.03.2009 15

4.3 Connections

4.3.1 Electrical connections

The knife sharpener is shipped without a power plug. The country-specific electrical connection must,

therefore, be established by a trained electrician. Make sure to always observe the motor rotation

direction! Make sure to connect the plug following the included circuit diagram!

4.4 Work and hazard areas

4.4.1 Work areas

1. Area in front of the machine

2. Grinding area

4.4.2 Hazard areas

1. Lever mechanism

for lifting and

lowering the motor

fixture

2. Cup grinding

wheel

3. Mechanism used to

adjust the grinding

angle

4. Clamping

device for

clamping the

knives

5. Grinding surface