Knife sharpener MS 100
Safety
10.03.2009 7
2.3.3 Training
The personnel must be given regular training by the operator. All instructions must be recorded to provide proof
that training was given.
Date Name Type of instruction Instruction given by Signature
2.4 Personal protective equipment
Personal protective equipment must be worn for all work activities to prevent health hazards.
Wear the protective equipment necessary for the specific task and until all work is complete.
Follow all notices regarding personnel protective equipment that are attached in the work area.
Pos: 2.22 /KN200 6-SM/Sicherhei t/006 Persö nliche Schutzausst attung/006 1. 1.0_1 Grundsä tzlich zu tragen _Titel @ 8\ mod_1143360998 458_1.doc @ 80989
Always wear:
Wear the following during all work activities:
Protective clothing
is tight fitting work clothing of low tensile strength, with tight sleeves and without any protruding parts. It is
primarily used to provide protection against entanglement in moving parts of machinery.
Do not wear any rings, chains or other kind of jewelry.
Safety shoes
to provide protection against heavy falling parts and slipping on slick surfaces.
Hearing protection
to protect against hearing damage.
Safety goggles
to protect the eyes from flying parts, splashes of liquid and grinding splatter.
Protective gloves
to protect the hands from friction, abrasions, piercing, cuts or deeper wounds as well as contact with hot
surfaces.
To Next Page
Loading...